Curved Fascia Fabrication for a Gas Station Canopy

Grandview fabricated green-and-white curved fascia sections for this gas station canopy project. The fascia combines aluminum composite panels, a galvanized steel frame, lower LED strip lighting, and separate illuminated logo panels.

The curved faces carry white sweeping graphics across a green background. Repeating diamond graphics continue along the other fascia sections, with oval logo panels positioned within the canopy branding.

curved-gas-station-canopy-fascia-factory

Curved Aluminum Composite Panels

The fascia face uses 4 mm white aluminum composite panel formed into a curved profile. Green film graphics create the colored areas, with white curves and diamond shapes making up the pattern.

The curved center sits between flat upper and lower areas. This gives the fascia a projecting face with straight edges along the top and bottom. The panels are made in separate sections that form the fascia around the canopy.

Behind the face, galvanized steel tubes form the internal frame. Galvanized sheet stiffeners support the curved panel. The outer panel carries the graphics, and the metal framework supports the fascia assembly.

Materials and Construction

ComponentMaterial and construction
Curved fascia face4 mm white aluminum composite panel, formed to a curve
Surface graphicsApplied green film with white curves and diamond patterns
Internal frame25 × 25 × 1.5 mm and 40 × 20 × 1.5 mm galvanized steel tubes
Panel stiffeners1.2 mm galvanized steel sheet
Lower fascia lighting6500K, 12V LED strip
Logo face5 mm opal acrylic with translucent film lettering
Logo enclosure0.8 mm stainless steel side returns and a 1.2 mm retaining edge
Logo lighting6500K LED modules
gas-station-canopy-fascia-layout-drawing

LED Lighting and Logo Panels

The fascia lighting has two parts. An LED strip runs along the lower edge of the standard sections. Separate LED modules sit inside the logo panels, behind the acrylic faces.

Each logo panel has an opal acrylic face with translucent film lettering. Stainless steel returns form the sides of the enclosure, while a retaining edge holds the face in place.

This gives the logo panel its own enclosure and light source within the surrounding fascia. The lower strip follows the canopy edge, while the logo modules illuminate the brand panels.

Fascia Sections and Graphic Layout

The fascia is divided into sections across all four sides of the canopy. The green-and-white pattern includes sweeping curves near the oval logos and repeating diamonds across the longer runs.

The graphic position follows the panel divisions, so the curved sections, patterned sections, and logo panels fit within the same fascia layout. The logo panels remain separate assemblies, with their own acrylic faces, metal edges, and lighting components.

For more about the product range, see our gas station canopy panels.

Send us your canopy dimensions and logo for a custom fascia quote.

Share:

Table of Contents

More Posts

Recommended Products

Get a Free Quote

Our representative will contact you soon.

Scroll to Top

Get a Free Quote

Our representative will contact you soon.